For Sales and Service please contact us on 336 909 9982 or e-mail This email address is being protected from spambots. You need JavaScript enabled to view it.

COSMOS MF.AG Hydrogen Generator for Hydro-Inert Sources

High Purity - Dynamic regeneration dryer

 
 

The COSMOS MF.AG Hydrogen  Generator is specifically designed for use with the Hydro-Inert source GC-MS Systems.

The Hydrogen gas is produced from deionised water using the exclusive 100% titanium Proton Exchange Membrane (PEM) technology, which provides a very high reliability, new longer life and better H2 purity.

The unit has all of our latest design features to produce the driest, highest purity hydrogen available from a generator guaranteeing the best hydrogen purity 24 hours a day.

The automatic checking for internal leaks whenever starting the units and constant control of operating parameters, guarantee maximum safety.

The touch screen LCD interface provides simple and user-friendly management of all functions on the unit.

 
 

Product Benefits

IMPROVED CHROMATOGRAPHY RESULTS

The use of dry hydrogen as a carrier gas allows :
- Faster and more sensitivity than the more expensive helium
- Lower temperature elution, thus extending the life of the chromatograph column
- Run time savings of 25% to 35% without a decline in resolution
- Less column bleed due to the lowest possible water content .
- Used in conjunction with the Hydro-inert source increases throughput gaining 100 extra injections
  per week due to reducing source cleaning from every 600 injections to every 6000 injections 

Improved ROI and Increased Cash generation

ROI based on maintaining Helium Elution Conditions.
Standard conditions allows 96 injections per day Source service interval approximately  every 6 days
Hydro-Inert conditions  96 injections per Day Source service interval every 60 days 
Benefit of 864 extra injections at an average income of $100 per injection $9600 per week
Benefit of gaining 9 days of technician time for more productive work in 10 weeks
Approximate Payback time based on single system is approximately 3 weeks

Payback if utilizing the potential for shorter run-times available with Hydrogen will be even Shorter

 

INCREASED LABORATORY EFFICIENCY

A constant, uninterrupted gas supply of guaranteed purity eliminates interruptions of analyses to change cylinders and reduces the amount of instrument re-calibrations required.

IMPROVED SAFETY

The very limited internal volume (less than 50 ml) allows safe use of the gas generators where the use of cylinders is risky or prohibited.

The application of tested safety technologies stops the unit in the event of leaks or malfunctions

SIMPLE INSTALLATION

Gas generators can be installed in the laboratory, on or under a bench, eliminating the need for long gas lines from cylinders secured elsewhere.

Characteristics

 Flow rate : 110, 170, 260, 300, 400, 500, 600, 1000, 1200, 1350, 1500 cc/min
 Purity > 99.99999%
 Pressure up to 11 bar (160 psi) : suitable for fast and high-speed GC methods
 Exclusive 100% titanium electrolytic cell : longer life/better gas purity
 LCD touch screen with indication in real time : H2 outlet pressure, H2 flow rate, water quality, water level, auto-diagnostics of breakdown with alarms
 LED indicators status (Ready, Stand-by, Alarm, Off)
 Remote PC monitoring and diagnostic analysis via USB  interfaces the unit with customer’s PC.  Software allowing  carrying  out checks and maintenance effectively, via a remote connection
 Automatic checking for internal leaks to guarantee maximum safety
 Optional interface to Leak detector in the GC oven
Ability to choose either retention time matching to Helium based chromatography for VOC's or to reduce run time to allow higher throughput.
 

Specifications

 
Models
MF.H2.110
MF.H2.170
MF.H2.300
MF.H2.400
MF.H2.500
MF.H2.600
MF.H2.1000
MF.H2.1200
MF.H2.1350
MF.H2.1500
                                              
GENERAL INFORMATION
H2 flow rate -cc/min
110
170
300
400
500
600
1000
1200
1350
1500
Electrolytic cell
Long life Multilayer PEM technology
H2 purity
> 99.99999% 
Delivery pressure
1 – 11 bar (14 – 160 psi)
Temperature range
From 5 – 35°C (41 – 95°F) and humidity 80% to 25°C (77°F)
Touch screen
Touch screen (operating parameters, system status, alarms) with LED indicators(Power on/off; ready or errors)
Dimensions
(W x H x D)
27 x 44 x 38 cm (10.5″ x 17″ x 15″)
Weight (kg/lbs)
17 / 37.5
18/29.6
20 / 44
21 / 46
22 / 48
Power consumption
100 W
120 W
205 W
220 W
255 W
385 W
440 W
700 W
Electrical supply
220 – 240 V 50 Hz
110 – 120 V 60 Hz
WATER
 
Water quality
Deionised, ASTM II, < 0.1 μS Conductivity
Supply pressure
Max. 6 bar
Internal water tank
2.3 liters
External water tank capacity (Optionnal)
5 or 10 liters
CONNECTIONS
 
Hydrogen outlet
1/8 Swagelock
Water inlet
Quick release push-in fitting
COMMUNICATION
 
USB/PC Control
Standard
RS232/RS485
Option
SPECIAL FUNCTION
 
Cascading mode
Option
Automatic water tank refill
Option